Is the engine centered in the chassis ?

Print Thread

Re: Is the engine centered in the chassis ? [Re: Cab_Burge] #2856089 12/06/20 03:12 PM 12/06/20 03:12 PM
Joined: Jan 2004 Posts: 8,343 fredericksburg,va C cudaman1969 master
cudaman1969 master C Joined: Jan 2004 Posts: 8,343 fredericksburg,va	Just measure the tunnel from each side, it’s not centered. Pass side Hemi cover is tight, driver side has a lot more room, measure that to tell how much engine is to the right. (All engines will be the same) Pinion is not centered either

Entire Thread
Subject	Posted By	Posted
Is the engine centered in the chassis ?	hemienvy	12/06/20 05:10 PM
Re: Is the engine centered in the chassis ?	bigdad	12/06/20 05:41 PM
Re: Is the engine centered in the chassis ?	MR_P_BODY	12/06/20 06:00 PM
Re: Is the engine centered in the chassis ?	Cab_Burge	12/06/20 06:07 PM
Re: Is the engine centered in the chassis ?	hemienvy	12/06/20 06:08 PM
Re: Is the engine centered in the chassis ?	gregsdart	12/06/20 06:37 PM
Re: Is the engine centered in the chassis ?	Cab_Burge	12/06/20 06:47 PM
Re: Is the engine centered in the chassis ?	cudaman1969	12/06/20 07:12 PM
Re: Is the engine centered in the chassis ?	Hemidavey	12/06/20 07:26 PM
Re: Is the engine centered in the chassis ?	CMcAllister	12/06/20 07:26 PM
Re: Is the engine centered in the chassis ?	Tig	12/06/20 06:04 PM
Re: Is the engine centered in the chassis ?	AndyF	12/06/20 09:31 PM
Re: Is the engine centered in the chassis ?	bigdad	12/06/20 09:39 PM
Re: Is the engine centered in the chassis ?	AndyF	12/06/20 11:46 PM
Re: Is the engine centered in the chassis ?	Rodenteliminator	12/07/20 01:02 AM
Re: Is the engine centered in the chassis ?	AndyF	12/07/20 01:40 AM
Re: Is the engine centered in the chassis ?	bigdad	12/07/20 02:30 AM
Re: Is the engine centered in the chassis ?	second 70	12/07/20 04:52 PM
Re: Is the engine centered in the chassis ?	CMcAllister	12/07/20 05:45 PM
Re: Is the engine centered in the chassis ?	Al_Alguire	12/07/20 06:03 PM
Re: Is the engine centered in the chassis ?	moparx	12/07/20 06:42 PM

Hop To