Thanks for the clarification.
So the "Endure-X 829-16 without any forced oil to the needle bearings is the old stand by for less than full out applications, or more frequent replacement.
The "Sportsman" 96892-16 get you the pressure fed needle bearings for $647.
And the AMC version 861-16 get both the pressure fed needle bearings and the ability to oil through the pushrods for $686.

My last engine in the Dart, 540 CID with aluminum block, 0.750" lift, etc. used the offset pushrod roller lifters with pushrod oiling for my CNC 440-1 heads with T&D paired rocker system.
Comp 892 series.
There is also the Elite set 98827-16.