Building a billet motor plate

Print Thread

Re: building a billet motor plate [Re: RobR] #2808583 08/13/20 06:41 PM 08/13/20 06:41 PM
Joined: Sep 2008 Posts: 656 Florida CJD AUTOMOTIVE OP mopar
CJD AUTOMOTIVE OP mopar Joined: Sep 2008 Posts: 656 Florida	Well, it fits. Jesel back plate retained with locating pins (Cerakote on the locating pin portion was a bad idea!): Then the motor plate: This is the belt cover/water pump back plate/cam sensor mount: Last edited by CJD AUTOMOTIVE; 08/14/20 11:01 AM. Craig Scholl CJD Automotive, LLC Jacksonville, FL www.CJDAUTOMOTIVE.com 904-400-1802 "I own a Mopar. I already know it won't be in stock, won't ship tomorrow, and won't fit without modification"

Entire Thread
Subject	Posted By	Posted
Building a billet motor plate	CJD AUTOMOTIVE	01/09/20 05:11 PM
Re: building a billet motor plate	moparx	01/09/20 05:24 PM
Re: building a billet motor plate	CJD AUTOMOTIVE	01/09/20 05:30 PM
Re: building a billet motor plate	CJD AUTOMOTIVE	01/09/20 05:38 PM
Re: building a billet motor plate	madscientist	01/09/20 07:40 PM
Re: building a billet motor plate	TRENDZ	01/09/20 07:52 PM
Re: building a billet motor plate	Bad340fish	01/09/20 08:18 PM
Re: building a billet motor plate	CJD AUTOMOTIVE	01/09/20 08:48 PM
Re: building a billet motor plate	Anonymous	01/10/20 12:56 AM
Re: building a billet motor plate	TRENDZ	01/10/20 01:44 AM
Re: building a billet motor plate	CJD AUTOMOTIVE	01/10/20 01:58 AM
Re: building a billet motor plate	tex013	01/10/20 09:20 AM
Re: building a billet motor plate	Adrielp	01/10/20 01:21 PM
Re: building a billet motor plate	J_BODY	01/13/20 03:19 AM
Re: building a billet motor plate	CJD AUTOMOTIVE	01/13/20 04:24 PM
Re: building a billet motor plate	Twostick	01/13/20 04:37 PM
Re: building a billet motor plate	CJD AUTOMOTIVE	01/13/20 04:44 PM
Re: building a billet motor plate	Twostick	01/13/20 04:57 PM
Re: building a billet motor plate	CJD AUTOMOTIVE	01/13/20 05:15 PM
Re: building a billet motor plate	jcc	01/13/20 11:15 PM
Re: building a billet motor plate	CJD AUTOMOTIVE	01/13/20 11:56 PM
Re: building a billet motor plate	hemi-itis	01/14/20 03:01 AM
Re: building a billet motor plate	CJD AUTOMOTIVE	07/23/20 03:14 PM
Re: building a billet motor plate	RATTRAP	07/23/20 03:16 PM
Re: building a billet motor plate	CJD AUTOMOTIVE	07/23/20 03:25 PM
Re: building a billet motor plate	MR_P_BODY	07/23/20 03:19 PM
Re: building a billet motor plate	CJD AUTOMOTIVE	07/23/20 03:28 PM
Re: building a billet motor plate	ZIPPY	07/23/20 06:09 PM
Re: building a billet motor plate	markz528	07/23/20 08:45 PM
Re: building a billet motor plate	CJD AUTOMOTIVE	07/23/20 08:53 PM
Re: building a billet motor plate	RATTRAP	07/23/20 09:45 PM
Re: building a billet motor plate	CJD AUTOMOTIVE	07/23/20 10:00 PM
Re: building a billet motor plate	markz528	07/23/20 10:05 PM
Re: building a billet motor plate	LA360	07/23/20 11:55 PM
Re: building a billet motor plate	jcc	07/24/20 01:40 PM
Re: building a billet motor plate	CJD AUTOMOTIVE	07/24/20 04:30 PM
Re: building a billet motor plate	CJD AUTOMOTIVE	07/24/20 04:38 PM
Re: building a billet motor plate	HemiDart68	07/24/20 05:12 PM
Re: building a billet motor plate	CJD AUTOMOTIVE	07/24/20 05:17 PM
Re: building a billet motor plate	Skeptic	07/25/20 03:11 AM
Re: building a billet motor plate	RATTRAP	07/27/20 10:03 AM
Re: building a billet motor plate	Jerry	07/27/20 11:50 AM
Re: building a billet motor plate	BloFish	07/28/20 09:29 PM
Re: building a billet motor plate	RobR	07/29/20 06:36 PM
Re: building a billet motor plate	CJD AUTOMOTIVE	08/13/20 10:41 PM
Re: building a billet motor plate	RATTRAP	08/14/20 10:25 AM
Re: building a billet motor plate	TRENDZ	08/14/20 01:48 PM
Re: building a billet motor plate	Al_Alguire	08/14/20 02:41 PM
Re: building a billet motor plate	CJD AUTOMOTIVE	08/14/20 02:52 PM
Re: building a billet motor plate	RATTRAP	08/14/20 05:23 PM
Re: building a billet motor plate	moparx	08/14/20 06:28 PM
Re: building a billet motor plate	RATTRAP	07/23/20 04:33 PM

Moderated by Al_Alguire, Hotwheelsjr, moparts, not_a_charger, RangerDan440, tboomer

Hop To