Originally Posted by 71birdJ68
A couple of things, is the ground reinforcement wire in place and look at the dimer coil on the switch, if it is broken then no lights.


he is getting voltage at fuse coming after the dimmer coil.

However, voltage can go throught a hair, and when load is requested, it can be not enough to light up the system. Maybe it worths the check for the coil/spring conditions?

but OP said with fuse, gets 0 volts... that's too radical.

Last edited by NachoRT74; 07/20/20 07:49 AM.
With a Charger born in Chrysler assembly plant in Valencia, Venezuela