Milling heads for compression

Print Thread

Re: Milling heads for compression [Re: HotRodDave] #2792536 07/04/20 07:45 AM 07/04/20 07:45 AM
Joined: Oct 2017 Posts: 80 Australia aus370 member
aus370 member Joined: Oct 2017 Posts: 80 Australia	Originally Posted by HotRodDave How much does every .010 decrease chamber size on the closed chamber heads? Trying to get BGE head to eagle chamber size. .0065" off for a 1cc chamber reduction was the figure i found for closed chambers . In reality my Apaches required .020 off for a 2.1 cc reduction , But ! that was after some chamber work and a valve job.

Entire Thread
Subject	Posted By	Posted
Milling heads for compression	HotRodDave	06/29/20 08:12 PM
Re: Milling heads for compression	roadrunninMark	06/30/20 01:24 AM
Re: Milling heads for compression	GTS340	06/30/20 12:34 PM
Re: Milling heads for compression	aus370	07/04/20 11:45 AM
Re: Milling heads for compression	HotRodDave	07/04/20 04:59 PM
Re: Milling heads for compression	aus370	07/10/20 09:48 PM

Hop To