I have a great relationship with my paint jobber. They have as far as I am concerned the best color guy around the area. He took shopline enamel and tinted and adjusted the color. They will not tint any shopline but when they knew what i was faced with they did it. We sprayed out some delstar the customer had mixed up a few years ago. That while touching things up looked really nice when sprayed out was way off. So we took the shopline enamel and sprayed that out. Still not close. He took a marker light bezel and worked the color. Customer was put and verified the color looked great to him. I dug into it today. Found the dealership in 69 had repaired the area which consisted of 3 small quarter size dents. Then primed the bare metal with red oxide primer. The primer was what was lifting off the metal. Got it all feathered out what they put on. Now plan to prime it with PPG DP50LV primers. Then repair the dents and then apply surfacer.