What is the correct style of lower steering column bearing for a '71 Challenger with automatic console shift? I see that there are a few different applications available. When I got the column, there was just a plastic ring that fit inside the forward end of the outer tube which was held in with a large C-clip.The plastic ring is much wider than the steering shaft itself, so it looks like there should be a bearing or something filling the space.

There are no provisions/threaded holes for bolts at the forward end of the outer tube that are often used to mount lower bearings. Is there another type of bearing that is retained by a clip at the end or bottom of the outer column tube? I will try and post a pic.

Thanks!