Thanks Dayclona, just ordered the LED bulb.
forgive my ignorance, if bulb burns out?
taking lens down, i seen the pic with snap clips.
do you pry down with screw driver?
is something going to break?
still uncertain, i haven't installed headliner yet. once i do i don't want to remove.
Pictures usually help, but as mentioned the light assy has 4 clips. 1 on each side, total of 4, holding it in the console frame, it's a SOB sometimes to remove, a thin blade screwdriver between the frames will pry it lose, work around the perimeter slowly until it pops out, getting it back in is just as frustrating, be careful not to stress the pressed cardboard of the console or headliner as it breaks easily
in the pics you'll see the perimeter frame that is crimped to the console, this holds the light in place, in the light pic I've arrowed the 4 clips that hold the light in the console perimeter frame, you don't want to remove the perimeter frame, just seperate the light assy from it
Mike
