long rod 400, 915 heads

Print Thread

Re: long rod 400, 915 heads [Re: viperblue72] #2747085 02/27/20 02:06 PM 02/27/20 02:06 PM
Joined: Feb 2016 Posts: 201 PA S Scully enthusiast
Scully enthusiast S Joined: Feb 2016 Posts: 201 PA	Originally Posted by viperblue72 I’m not so sure a flat top 400 even with closed chambers is 10 to 1. More like 8.5 to 1 It all depends on the deck height, gasket and chamber size. A .035" over 400 with zero deck height, a steel shim gasket and 75 cc heads would have a compression of 11.39.

Entire Thread
Subject	Posted By	Posted
long rod 400, 915 heads	hemienvy	02/26/20 09:36 PM
Re: long rod 400, 915 heads	CSK	02/26/20 10:03 PM
Re: long rod 400, 915 heads	jwb123	02/27/20 12:33 AM
Re: long rod 400, 915 heads	hemienvy	02/27/20 01:21 PM
Re: long rod 400, 915 heads	bobby66	02/27/20 02:36 PM
Re: long rod 400, 915 heads	AndyF	02/27/20 04:02 PM
Re: long rod 400, 915 heads	viperblue72	02/27/20 05:53 PM
Re: long rod 400, 915 heads	Scully	02/27/20 06:06 PM
Re: long rod 400, 915 heads	HotRodDave	02/27/20 06:41 PM
Re: long rod 400, 915 heads	viperblue72	02/27/20 08:56 PM
Re: long rod 400, 915 heads	cudaman1969	02/27/20 10:25 PM
Re: long rod 400, 915 heads	polyspheric	02/27/20 10:47 PM
Re: long rod 400, 915 heads	hemienvy	02/28/20 01:12 AM
Re: long rod 400, 915 heads	AndyF	02/28/20 01:52 AM
Re: long rod 400, 915 heads	hemienvy	02/28/20 02:10 AM
Re: long rod 400, 915 heads	AndyF	02/28/20 04:38 AM
Re: long rod 400, 915 heads	Harry's Taxi 2	02/28/20 12:11 PM
Re: long rod 400, 915 heads	viperblue72	02/28/20 02:27 PM
Re: long rod 400, 915 heads	Cab_Burge	02/28/20 07:07 PM
Re: long rod 400, 915 heads	Twostick	02/29/20 03:22 AM
Re: long rod 400, 915 heads	Cab_Burge	02/29/20 03:57 AM
Re: long rod 400, 915 heads	CSK	02/29/20 02:49 PM
Re: long rod 400, 915 heads	EchoSixMike	02/29/20 08:27 PM
Re: long rod 400, 915 heads	old yeller	02/28/20 02:19 AM
Re: long rod 400, 915 heads	cudaman1969	02/28/20 01:57 AM
Re: long rod 400, 915 heads	CSK	02/27/20 03:03 PM
Re: long rod 400, 915 heads	Scully	02/27/20 02:09 AM
Re: long rod 400, 915 heads	TrackPack	02/27/20 02:25 AM
Re: long rod 400, 915 heads	BSB67	02/27/20 02:31 AM
Re: long rod 400, 915 heads	mr_340	02/27/20 03:18 AM
Re: long rod 400, 915 heads	Cab_Burge	02/27/20 04:28 AM
Re: long rod 400, 915 heads	gregsdart	03/01/20 01:43 PM
Re: long rod 400, 915 heads	jwb123	03/01/20 02:43 PM

Moderated by Al_Alguire, Hotwheelsjr, moparts, not_a_charger, RangerDan440, tboomer

Hop To