Decking a 383. Mill valley walls too?

Print Thread

Re: Decking a 383. Mill valley walls too? [Re: Cab_Burge] #2744088 02/17/20 10:22 PM 02/17/20 10:22 PM
Joined: Jan 2003 Posts: 949 Indiana 6 68_661charger OP super stock
68_661charger OP super stock 6 Joined: Jan 2003 Posts: 949 Indiana	Yes I would definately cut the intake side of the head as well. I just thought the tops of the block where the valley pan bolts down needed to be addressed but if they don't then thats good.

Entire Thread
Subject	Posted By	Posted
Decking a 383. Mill valley walls too?	68_661charger	02/17/20 10:29 PM
Re: Decking a 383. Mill valley walls too?	Cab_Burge	02/18/20 01:44 AM
Re: Decking a 383. Mill valley walls too?	68_661charger	02/18/20 02:22 AM
Re: Decking a 383. Mill valley walls too?	elmor353	02/18/20 02:22 AM
Re: Decking a 383. Mill valley walls too?	RapidRobert	02/18/20 02:49 AM
Re: Decking a 383. Mill valley walls too?	BSB67	02/18/20 03:09 AM
Re: Decking a 383. Mill valley walls too?	LaRoy Engines	02/18/20 03:46 AM
Re: Decking a 383. Mill valley walls too?	calrobb2000	02/18/20 06:16 AM
Re: Decking a 383. Mill valley walls too?	cdp	02/21/20 12:33 AM
Re: Decking a 383. Mill valley walls too?	AndyF	02/21/20 01:44 AM

Hop To