Magnum 360 stroker questions - Moparts Forums

Register Log In Moparts Forums Unlawfl's Race & Engine Tech Magnum 360 stroker questions

Print Thread

Re: Magnum 360 stroker questions [Re: Dave_J] #2740221 02/06/20 08:45 AM 02/06/20 08:45 AM
Joined: Mar 2006 Posts: 9,879 MI, usa dvw master
dvw master Joined: Mar 2006 Posts: 9,879 MI, usa	the heads are rough, not confident the cometic gaskets will seal, only reason to mill them. Nobody around here can do much less than .010. [/quote] You need to find a real machinist. Weve skim cut heads .002" without issue. Doug

Entire Thread
Subject	Posted By	Posted
Magnum 360 stroker questions	fourgearsavoy	01/30/20 02:22 AM
Re: Magnum 360 stroker questions	Ody1003	01/30/20 01:24 PM
Re: Magnum 360 stroker questions	b1dartsport	01/30/20 01:41 PM
Re: Magnum 360 stroker questions	RMCHRGR	01/30/20 01:45 PM
Re: Magnum 360 stroker questions	RMCHRGR	01/30/20 01:58 PM
Re: Magnum 360 stroker questions	Hellrico505	01/30/20 02:15 PM
Re: Magnum 360 stroker questions	fourgearsavoy	02/02/20 04:13 PM
Re: Magnum 360 stroker questions	moparacer	02/03/20 01:35 AM
Re: Magnum 360 stroker questions	gzig5	01/30/20 02:05 PM
Re: Magnum 360 stroker questions	4406bbl	02/03/20 05:38 AM
Re: Magnum 360 stroker questions	BcudaChris	02/03/20 06:28 PM
Re: Magnum 360 stroker questions	viperblue72	02/04/20 01:12 AM
Re: Magnum 360 stroker questions	Dave_J	02/04/20 05:14 AM
Re: Magnum 360 stroker questions	4406bbl	02/04/20 04:25 PM
Re: Magnum 360 stroker questions	Dave_J	02/05/20 05:36 AM
Re: Magnum 360 stroker questions	BcudaChris	02/05/20 06:45 PM
Re: Magnum 360 stroker questions	fourgearsavoy	02/06/20 04:01 AM
Re: Magnum 360 stroker questions	dvw	02/06/20 12:45 PM
Re: Magnum 360 stroker questions	Dave_J	02/06/20 09:13 PM
Re: Magnum 360 stroker questions	fourgearsavoy	05/01/20 10:23 PM

Moderated by Al_Alguire, Hotwheelsjr, moparts, not_a_charger, RangerDan440, tboomer

Hop To

Powered by UBB.threads™ PHP Forum Software 7.7.1