Front Bumper Question

Print Thread

Re: Front Bumper Question [Re: moparx] #2736762 01/26/20 12:50 PM 01/26/20 12:50 PM
Joined: Jan 2003 Posts: 18,427 UPPER MICHIGAN, MARQUETTE COUN... N NITROUSN OP I Live Here
NITROUSN OP I Live Here N Joined: Jan 2003 Posts: 18,427 UPPER MICHIGAN, MARQUETTE COUN...	Originally Posted by moparx those bolts are indeed 3/8"-16 x [approximately] 1" long. i have the nose of my charger [grille/bumper/valance] off at this time, and just looked. these parts have not been off this car since new, and i have owned it since 1970. most holes are larger than necessary to provide some adjustment, but mostly for ease of assembly. i can take a pic or two if you want. Ok so the 3/8 bolts with the captive washers on the nuts are correct then? What is used on the bolt end a washer? good pics would be great. Note I edited my posts the captive washers are on the nuts. Last edited by NITROUSN; 01/26/20 07:10 PM.

Hop To