Torque spec for vistor head with studs

Print Thread

Re: Torque spec for vistor head with studs [Re: Cab_Burge] #2727226 12/26/19 10:11 PM 12/26/19 10:11 PM
Joined: Jan 2007 Posts: 8,043 Mt Morris Michigan mopar dave OP master
mopar dave OP master Joined: Jan 2007 Posts: 8,043 Mt Morris Michigan	Ok, last I measured I had .037 rocked on one side and .049 on the other. I don't think the piston would ever come up the bore rocked totally to one side ever. http://www.youtube.com/watch?v=aIxaesJ190U http://youtu.be/lCZAaN7fFLg

Entire Thread
Subject	Posted By	Posted
Torque spec for vistor head with studs	mopar dave	12/26/19 10:54 PM
Re: Torque spec for vistor head with studs	SportF	12/26/19 11:59 PM
Re: Torque spec for vistor head with studs	mopar dave	12/27/19 12:04 AM
Re: Torque spec for vistor head with studs	Cab_Burge	12/27/19 12:47 AM
Re: Torque spec for vistor head with studs	mopar dave	12/27/19 02:11 AM
Re: Torque spec for vistor head with studs	Cab_Burge	12/27/19 03:33 AM
Re: Torque spec for vistor head with studs	mopar dave	12/27/19 08:42 AM
Re: Torque spec for vistor head with studs	B1MAXX	12/27/19 03:41 PM

Hop To