molar crank - Moparts Forums

Register Log In Moparts Forums Unlawfl's Race & Engine Tech molar crank

Print Thread

Re: molar crank [Re: 340Cuda] #2702660 10/01/19 03:51 PM 10/01/19 03:51 PM
Joined: Mar 2006 Posts: 9,889 MI, usa dvw master
dvw master Joined: Mar 2006 Posts: 9,889 MI, usa	My experience with Tom was great. He is very helpful. The parts were near perfect on weight. Machining was good as well. Parts balanced without Mallory metal. 4.500crank, 7.100/2.200/.990 rods. Over 300 passes on the rods, nearly 200 on the crank without issue. 2222 bobweight. Max rpm 7500. Doug

Entire Thread
Subject	Posted By	Posted
molar crank	coronetville	09/30/19 05:47 PM
Re: molar crank	mopar dave	09/30/19 06:08 PM
Re: molar crank	b1dartsport	09/30/19 06:23 PM
Re: molar crank	mopar dave	09/30/19 06:25 PM
Re: molar crank	markz528	09/30/19 08:04 PM
Re: molar crank	cl440	09/30/19 08:32 PM
Re: molar crank	cl440	10/02/19 12:44 PM
Re: molar crank	340Cuda	10/01/19 02:24 PM
Re: molar crank	dvw	10/01/19 07:51 PM
Re: molar crank	coronetville	10/02/19 02:18 AM
Re: molar crank	BradH	10/02/19 01:15 PM
Re: molar crank	hudsonhornet7x	10/02/19 02:27 PM
Re: molar crank	BradH	10/02/19 02:37 PM
Re: molar crank	AndyF	10/02/19 03:29 PM
Re: molar crank	mopar dave	10/02/19 05:26 PM
Re: molar crank	dvw	10/02/19 07:01 PM
Re: molar crank	AndyF	10/02/19 07:49 PM
Re: molar crank	dvw	10/02/19 09:55 PM
Re: molar crank	astjp2	10/02/19 10:03 PM

Moderated by Al_Alguire, Hotwheelsjr, moparts, not_a_charger, RangerDan440, tboomer

Hop To

Powered by UBB.threads™ PHP Forum Software 7.7.1