Help ID this factory torque convertor

Print Thread

Re: Help ID this factory torque convertor [Re: John_Kunkel] #2698775 09/18/19 07:39 PM 09/18/19 07:39 PM
Joined: Mar 2011 Posts: 3,087 Michigan A A727Tflite master
A727Tflite master A Joined: Mar 2011 Posts: 3,087 Michigan	My reference docs only go to -386. The -386 is a Reman 10-3/4” HP low stall, Look inside the impeller hub while holding the converter on its ring gear. Look inside and if you see a seal it is lockup. If no seal it’s non-lockup. Last edited by Transman; 09/18/19 08:03 PM.

Entire Thread
Subject	Posted By	Posted
Help ID this factory torque convertor	rarefish	09/17/19 03:21 PM
Re: Help ID this factory torque convertor	John_Kunkel	09/17/19 05:28 PM
Re: Help ID this factory torque convertor	rarefish	09/17/19 06:19 PM
Re: Help ID this factory torque convertor	John_Kunkel	09/18/19 05:09 PM
Re: Help ID this factory torque convertor	A727Tflite	09/18/19 11:39 PM
Re: Help ID this factory torque convertor	BIGGERED	09/19/19 12:39 AM
Re: Help ID this factory torque convertor	BIGGERED	09/19/19 04:31 PM
Re: Help ID this factory torque convertor	John_Kunkel	09/19/19 04:58 PM

Hop To