Intake for Gen 2 Hemi with 10.4" Deck

Print Thread

Intake for Gen 2 Hemi with 10.4" Deck #2695486 09/08/19 03:09 PM 09/08/19 03:09 PM
Joined: Jan 2003 Posts: 3,048 Richmond, Tx. (Houston) GTSDave OP master
GTSDave OP master Joined: Jan 2003 Posts: 3,048 Richmond, Tx. (Houston)	Does anyone make a non sheet metal intake that will work on a Gen 2 Hemi with a 10.4" deck? Trying to assemble one from an old SS/AH short block to run in NSS, but I cannot use a sheet metal intake. Not sure if there is anything out there that will work or will be close enough for me to machine it enough to fit. -Dave PLEASE Pray for our brothers and sisters in harms way. If you are the owner of a GTS us at the GTS Registry www.gtsregistry.com

Entire Thread
Subject	Posted By	Posted
Intake for Gen 2 Hemi with 10.4" Deck	GTSDave	09/08/19 07:09 PM
Re: Intake for Gen 2 Hemi with 10.4" Deck	rickseeman	09/08/19 10:09 PM
Re: Intake for Gen 2 Hemi with 10.4" Deck	GTSDave	09/09/19 01:24 AM
Re: Intake for Gen 2 Hemi with 10.4" Deck	68shifter	09/09/19 02:09 AM
Re: Intake for Gen 2 Hemi with 10.4" Deck	an8sec70cuda	09/09/19 01:31 PM
Re: Intake for Gen 2 Hemi with 10.4" Deck	GTSDave	09/09/19 02:52 PM

Hop To