Hey guys, hoping I can get some input on cam selection for the 413 I'm putting together. I have 3 different cams sitting here but don't know that any of them are really a good fit for it. Trying to decide if I should use one of them or get something different. Engine specs and cam details as follows...
413
.040 over flat tops (approx. .080 below deck, have not confirmed compression yet, maybe around 9:1...)
Stock Stroke
452 heads 2.08/1.74 valves, mild porting
Valvetrain to be OEM adjustables or stamped steel depending on cam selection
Intake will either be M1 single plane, TM7 or M1 tunnel Ram
Carb will be 825 Demon or (2) Holley 660's
4 Speed Transmission
4.10 gears w/30" tire (eventually may go 4.56 or 4.88)
Vehicle weight (3500 +/-)
Cams on hand...
Lunati Voodoo (Hydraulic) - Adv 268/276, 494/513 lift, 226/234 @ .050, 110 LSA.
Crower (Solid) - Adv 304/318, 555/561 lift, 262/274 @ .050, 105 LSA
Hughes (Solid) 246/252 @ .050, 555/572 lift, 108 LSA
So what says the experts? Use one of the above cams or choose something different like???
As always, appreciate the input. -Trent