741 to a 489 - Moparts Forums

Register Log In Moparts Forums Moparts Question and Answer 741 to a 489

Print Thread

Re: 741 to a 489 [Re: RapidRobert] #2682075 07/28/19 05:14 PM 07/28/19 05:14 PM
Joined: Jul 2019 Posts: 5 MI A AlanJodie71 OP member
AlanJodie71 OP member A Joined: Jul 2019 Posts: 5 MI	Yes the 741 is a SG .just seams odd they fell out, after removing both axles the driver side had the adjustment Nut for thrust adjustment,I will switch and put the adjustment on the correct side . And thanks for the Tips on installing the seal great info

Entire Thread
Subject	Posted By	Posted
741 to a 489	AlanJodie71	07/28/19 06:20 PM
Re: 741 to a 489	RapidRobert	07/28/19 07:12 PM
Re: 741 to a 489	fastmark	07/28/19 09:09 PM
Re: 741 to a 489	AlanJodie71	07/28/19 09:17 PM
Re: 741 to a 489	AlanJodie71	07/28/19 09:44 PM
Re: 741 to a 489	Cab_Burge	07/28/19 11:35 PM
Re: 741 to a 489	AlanJodie71	07/29/19 11:50 PM
Re: 741 to a 489	FurryStump	07/30/19 12:46 PM
Re: 741 to a 489	AlanJodie71	07/28/19 09:14 PM

Moderated by Al_Alguire, Hotwheelsjr, moparts, not_a_charger, RangerDan440, tboomer

Hop To

Powered by UBB.threads™ PHP Forum Software 7.7.1