240 trick flow head rocker arms

Print Thread

Re: 240 trick flow head rocker arms [Re: tex013] #2680301 07/23/19 01:21 AM 07/23/19 01:21 AM
Joined: Jan 2003 Posts: 1,811 North Dakota Azzkikrcuda top fuel
Azzkikrcuda top fuel Joined: Jan 2003 Posts: 1,811 North Dakota	I am running Pro Magnums on my TF240 heads. They are very close to the pedestals, but they barely fit. Had to grid alot off the holddowns to get there. I don't think taking some off the sides of the rockers would be an issue if needed though. The only Carbs I care about are under the hood!

Entire Thread
Subject	Posted By	Posted
240 trick flow head rocker arms	Furys	07/23/19 04:03 AM
Re: 240 trick flow head rocker arms	madscientist	07/23/19 04:39 AM
Re: 240 trick flow head rocker arms	tex013	07/23/19 05:06 AM
Re: 240 trick flow head rocker arms	Azzkikrcuda	07/23/19 05:21 AM
Re: 240 trick flow head rocker arms	DusterKid	07/23/19 11:25 AM
Re: 240 trick flow head rocker arms	madscientist	07/23/19 03:12 PM

Hop To