For some reasons the lock nut came loose on the rocker. This is why the pushrod came out. Don’t know why after so long that the nut broke loose? I only ran it up to like 4K rpm and it pull hard to 6500+but to be honest I have not run it at the track for years. I had two pushrod and put them in today and it fired right up!

I am going to pull the intake and would like to replace that lifter if I can get just one form Crane cam. Don’t want to buy 8 of them to get one. I would sleep better if I can replace it! I am going to double nut the adjuster bolt. Don’t want to have it happen again and don’t want to lose my motor over it! I know one thing for sure if the lifter breaks it over quick!