Originally Posted by krautrock
Originally Posted by StealthWedge67
I run Hooker 5903’s on my 67 Beng combo,


I was thinking about those headers (well actually, some patriot bare headers so I could try a hi temp paint on them...the tubes all look the same), do you run angle spark plug heads? if so, how is the plug/wire clearances?


Stealth Heads, so straight plugs. No fitment issues, plugs are pretty easy to access. I did think of one issue: my #7 tube blocks off the bolt hole location in the inside of that port. I run them with no bolt there, they’ve never leaked at that location.

Last edited by StealthWedge67; 04/09/19 04:26 PM.
LemonWedge - Street heavy / Strip ready - 11.07 @ 120