correct exhaust manifolds

Print Thread

Re: correct exhaust manifolds [Re: 4x4 Roundup] #2643140 04/09/19 10:00 AM 04/09/19 10:00 AM
Joined: Jan 2003 Posts: 4,784 Ontario, Canada mccannix master
mccannix master Joined: Jan 2003 Posts: 4,784 Ontario, Canada	Anyone know the reasoning as to why two different heat riser counterweights were used on the 68-70 340 manifolds. The thin ones shown in Scotts pictures and the thicker one, can both be found on assembly line 68-70 340 manifolds. Could it be early verses later 68-70 manifold as I believe the thinner ones are more commonly seen.

Entire Thread
Subject	Posted By	Posted
correct exhaust manifolds	karengarneau	04/01/19 03:10 PM
Re: correct exhaust manifolds	Rhinodart	04/01/19 04:08 PM
Re: correct exhaust manifolds	karengarneau	04/01/19 10:48 PM
Re: correct exhaust manifolds	Morty426	04/01/19 11:42 PM
Re: correct exhaust manifolds	ScottSmith_Harms	04/02/19 01:29 AM
Re: correct exhaust manifolds	Rhinodart	04/02/19 02:23 AM
Re: correct exhaust manifolds	ScottSmith_Harms	04/02/19 03:04 AM
Re: correct exhaust manifolds	ScottSmith_Harms	04/02/19 03:06 AM
Re: correct exhaust manifolds	ScottSmith_Harms	04/02/19 03:07 AM
Re: correct exhaust manifolds	4x4 Roundup	04/09/19 02:23 AM
Re: correct exhaust manifolds	mccannix	04/09/19 02:00 PM
Re: correct exhaust manifolds	karengarneau	05/03/19 02:41 PM

Hop To