Bearing Clearance - Moparts Forums

Register Log In Moparts Forums Gen III Hemi Tech Bearing Clearance

Print Thread

Bearing Clearance #2641575 04/05/19 01:32 PM 04/05/19 01:32 PM
Joined: Jan 2003 Posts: 2,045 MD RTSE4ME OP top fuel
RTSE4ME OP top fuel Joined: Jan 2003 Posts: 2,045 MD	What do guys think of these clearances. Molnar 3.9 Crank and rods. Mains with King Race std =.0014 Mains with ACL Race stdX= .0035 Rods with King Race stdX= .0028 Should I go a bit tighter than .0035 on the mains?

Entire Thread
Subject	Posted By	Posted
Bearing Clearance	RTSE4ME	04/05/19 05:32 PM
Re: Bearing Clearance	DemonDust	04/05/19 08:10 PM
Re: Bearing Clearance	RTSE4ME	04/05/19 09:14 PM
Re: Bearing Clearance	DemonDust	04/05/19 11:08 PM
Re: Bearing Clearance	RTSE4ME	04/05/19 11:25 PM
Re: Bearing Clearance	Get-X	04/06/19 12:18 AM
Re: Bearing Clearance	RTSE4ME	04/06/19 12:03 PM

Moderated by Al_Alguire, Hotwheelsjr, moparts, not_a_charger, RangerDan440, tboomer

Hop To

Powered by UBB.threads™ PHP Forum Software 7.7.1