I prob should have wrote what I was really thinking lol Mind is going one way and not really getting it all down.

This is my first experience with solid roller and also with 426 Hemi. I've heard the stories about the needle bearing rollers coming apart and after quite a bit of reading and research it seems to be linked mostly to loose lash. Lash is either set too loose, or loosens over time and is not caught and ends up pounding the bearing out.

So, to be more specific, I was wondering who has had the most success running solid roller cam with stock rocker arms, and at what lash?

With the understanding that the cam makers lash recommendations are only that, recommendations for a point to start at, not necessarily to finish at.

Also with the understanding that you have clearance Everywhere to tighten the lash, and that you're not going to tight (power loss situation)

Hopefully that's more clear, and sorry for the confusion of the first post : (