Robert...I read another post and you do not seem like a fan of the MSD products. Lets say for the sake of arguement that I pull the whole system out and put in something else. What would you recommend?
Dave actually I was being a bit facetious as I have nothing against MSD & I will stop doing that cuz it gave (you) the wrong impression (& it was my first time!). I do have one of those adjustable timing knobs (not hooked up yet) but I really want to try it. I would suggest pulling the yellow wire off of the starter relay to disable the starter & with the key "on" & a helper holding the key to "crank" you with your meter see if everything that should be fed (in both positions) is being fed & if OK there then confirm the MSD/coil etc (everything related) is correctly wired & if good then we'll continue on & find out which DEVICE is faulty then we will be in a better (informed) position to decide what to do next.
