Brake rotor dust shield re-galvanizing

Print Thread

Re: Brake rotor dust shield re-galvanizing [Re: topside] #2606877 01/15/19 01:05 PM 01/15/19 01:05 PM
Joined: Jan 2003 Posts: 20,788 Eagle, Idaho Neil OP The Doctor is in.
Neil OP The Doctor is in. Joined: Jan 2003 Posts: 20,788 Eagle, Idaho	Now considering silver leaf gilding with clear over it. Not sure it's possible to get the sharp edges with it though???

Entire Thread
Subject	Posted By	Posted
Brake rotor dust shield re-galvanizing	Neil	12/28/18 10:19 PM
Re: Brake rotor dust shield re-galvanizing	hemi71x	12/28/18 11:02 PM
Re: Brake rotor dust shield re-galvanizing	Neil	12/28/18 11:05 PM
Re: Brake rotor dust shield re-galvanizing	ScottSmith_Harms	12/28/18 11:45 PM
Re: Brake rotor dust shield re-galvanizing	Neil	12/29/18 12:04 AM
Re: Brake rotor dust shield re-galvanizing	AndyF	12/29/18 01:32 AM
Re: Brake rotor dust shield re-galvanizing	FJR doc	12/29/18 03:11 AM
Re: Brake rotor dust shield re-galvanizing	71birdJ68	12/29/18 03:30 AM
Re: Brake rotor dust shield re-galvanizing	hemi71x	12/29/18 05:26 AM
Re: Brake rotor dust shield re-galvanizing	DAYCLONA	12/29/18 05:57 AM
Re: Brake rotor dust shield re-galvanizing	kentj340	12/29/18 11:03 AM
Re: Brake rotor dust shield re-galvanizing	DAYCLONA	12/29/18 02:19 PM
Re: Brake rotor dust shield re-galvanizing	AAR#2	12/29/18 06:08 PM
Re: Brake rotor dust shield re-galvanizing	318 Stroker	12/29/18 04:33 PM
Re: Brake rotor dust shield re-galvanizing	gtx6970	12/29/18 05:39 PM
Re: Brake rotor dust shield re-galvanizing	ScottSmith_Harms	12/29/18 06:13 PM
Re: Brake rotor dust shield re-galvanizing	FJR doc	12/30/18 12:33 AM
Re: Brake rotor dust shield re-galvanizing	Neil	12/30/18 03:06 AM
Re: Brake rotor dust shield re-galvanizing	DAYCLONA	12/30/18 07:55 AM
Re: Brake rotor dust shield re-galvanizing	kentj340	12/30/18 11:37 AM
Re: Brake rotor dust shield re-galvanizing	topside	12/30/18 06:42 PM
Re: Brake rotor dust shield re-galvanizing	Neil	01/15/19 05:05 PM

Hop To