Mild 440 - Moparts Forums

Register Log In Moparts Forums Moparts Question and Answer Mild 440

Print Thread

Re: Mild 440 [Re: elmor353] #2606656 01/14/19 10:49 PM 01/14/19 10:49 PM
Joined: Jun 2008 Posts: 3,916 usa L lewtot184 master
lewtot184 master L Joined: Jun 2008 Posts: 3,916 usa	I looked at the idea of some '67 pistons (L2266 IIRC) for a project. I thought they would be around .080"+ in the hole with an uncut block.

Entire Thread
Subject	Posted By	Posted
Mild 440	elmor353	01/13/19 05:20 AM
Re: Mild 440	RapidRobert	01/13/19 05:39 AM
Re: Mild 440	BSB67	01/13/19 05:40 AM
Re: Mild 440	fast68plymouth	01/14/19 12:56 AM
Re: Mild 440	Cab_Burge	01/14/19 01:20 AM
Re: Mild 440	lewtot184	01/14/19 01:23 AM
Re: Mild 440	dOc !	01/14/19 10:07 AM
Re: Mild 440	bobby66	01/14/19 01:04 PM
Re: Mild 440	fast68plymouth	01/14/19 05:43 PM
Re: Mild 440	elmor353	01/15/19 01:32 AM
Re: Mild 440	dOc !	01/15/19 10:44 AM
Re: Mild 440	lewtot184	01/15/19 02:49 AM
Re: Mild 440	elmor353	01/15/19 01:17 PM
Re: Mild 440	lewtot184	01/15/19 03:19 PM
Re: Mild 440	Mebsuta	01/30/19 01:54 AM
Re: Mild 440	lewtot184	01/30/19 03:17 PM
Re: Mild 440	fast68plymouth	01/15/19 06:26 PM
Re: Mild 440	elmor353	01/18/19 05:10 AM

Moderated by Al_Alguire, Hotwheelsjr, moparts, not_a_charger, RangerDan440, tboomer

Hop To

Powered by UBB.threads™ PHP Forum Software 7.7.1