pushrods - Moparts Forums

Register Log In Moparts Forums Unlawfl's Race & Engine Tech pushrods

Print Thread

Re: pushrods [Re: LA360] #2571122 10/29/18 05:58 PM 10/29/18 05:58 PM
Joined: Jul 2010 Posts: 2,422 Pittsburgh PA Eric top fuel
Eric top fuel Joined: Jul 2010 Posts: 2,422 Pittsburgh PA	Originally Posted By LA360 Trend or Smith Bros, 0.080" as a minimum thickness Trend in this motor but I have used both with great results. BGR also makes them in house. 5.53 @ 125 1/8th on the launch control..more left in her!

Entire Thread
Subject	Posted By	Posted
pushrods	DusterKid	10/21/18 02:12 AM
Re: pushrods	RapidRobert	10/21/18 02:22 AM
Re: pushrods	fbs63	10/21/18 02:27 AM
Re: pushrods	slantzilla	10/21/18 03:15 AM
Re: pushrods	CSK	10/21/18 04:16 AM
Re: pushrods	Harry's Taxi 2	10/21/18 02:01 PM
Re: pushrods	79410aspenrt	10/21/18 05:00 PM
Re: pushrods	MR_P_BODY	10/21/18 05:20 PM
Re: pushrods	LA360	10/22/18 03:20 AM
Re: pushrods	Eric	10/29/18 09:58 PM
Re: pushrods	B1MAXX	10/21/18 05:06 PM
Re: pushrods	polyspheric	10/22/18 03:56 AM
Re: pushrods	dogdays	10/29/18 09:43 PM
Re: pushrods	383man	10/30/18 03:09 AM
Re: pushrods	polyspheric	10/30/18 03:20 PM
Re: pushrods	an8sec70cuda	10/31/18 07:58 PM
Re: pushrods	Cab_Burge	10/31/18 11:06 PM
Re: pushrods	Lee446	11/01/18 12:28 AM
Re: pushrods	therocks	11/02/18 12:43 PM
Re: pushrods	dogdays	11/05/18 08:07 PM
Re: pushrods	polyspheric	11/06/18 03:13 AM

Moderated by Al_Alguire, Hotwheelsjr, moparts, not_a_charger, RangerDan440, tboomer

Hop To

Powered by UBB.threads™ PHP Forum Software 7.7.1