Rocker shaft orientation - Moparts Forums

Register Log In Moparts Forums Gen III Hemi Tech Rocker shaft orientation

Print Thread

Re: Rocker shaft orientation [Re: ric3xrt] #2556285 09/29/18 02:37 PM 09/29/18 02:37 PM
Joined: Jun 2005 Posts: 2,776 Ontario Canada M MattW OP master
MattW OP master M Joined: Jun 2005 Posts: 2,776 Ontario Canada	Notches up but also oil holes pointed to the inside. If you mix up the shafts you could end up with an intake shaft on an exhaust side with the oil holes pointed outwards. Matt

Entire Thread
Subject	Posted By	Posted
Rocker shaft orientation	MattW	09/24/18 04:44 AM
Re: Rocker shaft orientation	MattW	09/25/18 12:50 AM
Re: Rocker shaft orientation	Just-a-dart	09/25/18 05:26 AM
Re: Rocker shaft orientation	MattW	09/26/18 11:00 PM
Re: Rocker shaft orientation	GoodysGotaCuda	09/27/18 01:29 AM
Re: Rocker shaft orientation	GoodysGotaCuda	09/27/18 01:32 AM
Re: Rocker shaft orientation	MattW	09/28/18 02:00 PM
Re: Rocker shaft orientation	MattW	09/28/18 05:33 PM
Re: Rocker shaft orientation	Silver70	09/28/18 05:52 PM
Re: Rocker shaft orientation	ric3xrt	09/29/18 01:25 PM
Re: Rocker shaft orientation	MattW	09/29/18 06:37 PM
Re: Rocker shaft orientation	ric3xrt	09/29/18 06:58 PM
Re: Rocker shaft orientation	MattW	09/30/18 01:01 AM
Re: Rocker shaft orientation	MattW	12/12/18 02:00 AM
Re: Rocker shaft orientation	MattW	08/28/20 05:10 PM
Re: Rocker shaft orientation	Button	09/23/20 12:05 PM

Moderated by Al_Alguire, Hotwheelsjr, moparts, not_a_charger, RangerDan440, tboomer

Hop To

Powered by UBB.threads™ PHP Forum Software 7.7.1