Cast tunnel rams on 500+ cube motors

Print Thread

Re: Cast tunnel rams on 500+ cube motors [Re: Hot 340] #2542834 08/29/18 12:50 AM 08/29/18 12:50 AM
Joined: Jan 2003 Posts: 6,392 nielsville, minn. Q quickd100 master
quickd100 master Q Joined: Jan 2003 Posts: 6,392 nielsville, minn.	The tunnel ram probably doesn't weigh any more than one of those single planes too. I d love to try some spacers but I'd have to cut the hood and I won't do that.

Entire Thread
Subject	Posted By	Posted
Cast tunnel rams on 500+ cube motors	Hot 340	08/26/18 04:02 AM
Re: Cast tunnel rams on 500+ cube motors	sgcuda	08/26/18 04:09 AM
Re: Cast tunnel rams on 500+ cube motors	Hot 340	08/26/18 04:18 AM
Re: Cast tunnel rams on 500+ cube motors	Cab_Burge	08/26/18 11:37 PM
Re: Cast tunnel rams on 500+ cube motors	Hot 340	08/28/18 11:20 AM
Re: Cast tunnel rams on 500+ cube motors	an8sec70cuda	08/28/18 02:56 PM
Re: Cast tunnel rams on 500+ cube motors	quickd100	08/26/18 02:22 PM
Re: Cast tunnel rams on 500+ cube motors	Tig	08/26/18 08:50 PM
Re: Cast tunnel rams on 500+ cube motors	Wedgeman	08/28/18 12:02 AM
Re: Cast tunnel rams on 500+ cube motors	astjp2	08/28/18 04:05 AM
Re: Cast tunnel rams on 500+ cube motors	quickd100	08/29/18 04:50 AM
Re: Cast tunnel rams on 500+ cube motors	an8sec70cuda	08/29/18 07:27 PM
Re: Cast tunnel rams on 500+ cube motors	6PKRTSE	08/29/18 05:55 PM
Re: Cast tunnel rams on 500+ cube motors	hp383	08/29/18 08:33 PM
Re: Cast tunnel rams on 500+ cube motors	Panty Dropper	09/05/18 03:23 AM

Hop To