Originally Posted By Morty426
Originally Posted By DAYCLONA
Originally Posted By Morty426
Originally Posted By TiMopar
Are these available repro now?


Have never seen a repo.

I sold the OP "replacement" emblem that is very close




C. was the "replacement" emblem the 3 prong type? if so those are available repro from the likes of YO, Classic, etc...

the original is a glue/stick on...

Mike


Mike,

We are talking about the stick on "Dodge" emblem that goes on the deck lid on a 71 Challenger. The emblem I believe was originally used on a 69 Dart. It has been superseded twice and the one that some people try to pass off is for a 1980 Aspen SE.

Sounds like you are talking about the 70 only Challenger side script which has three prongs. I have quite a few originals but I will have to check that out.

What about the two pin R/T emblem for the side 0 used on stripe delete and bumblebee stripe cars?

Chris





Chris,

I'm referring to this 3 pin DODGE emblem for the challenger 71 grille, if I recall it's the same size/font as the trunk emblem including the black out segment on the "E", just suggesting this could be substituted, either use the pins to attach or remove the pins and surgically cut a lettered 2 way tape for it

Mike

dodgeclassic.JPG