Are you sure about that compression ratio? That's a lot for iron heads.
If you were at 9.5:1 with iron, or 10.0 with aluminum, I'd say the Engle cam I put in my 446" 440 - 4speed, 3.55s, taller tire, '63 Savoy wagon - would be great. It was 224/234 @ .050, lift was around .504/.512, 110 CL. Well-behaved, nice street cam, not too rumpity, fine with 92 octane. That car ran Eddy heads and the full Maxie exhaust system, single 850 Holley, 10.0:1 actual CR. You can find the lobe specs at their website.