All these hours and hours of work to make the install take about 10 minutes...
I installed the torsion bars from the front and slid them about halfway back through the cross-member...
We had made a 2x2 box tube that fits between the frame rails to lift the car with the engine crane...
It is as simple as lifting it up and them positioning the engine and trans and then lowering it back down...
Put the 4 transmission cross member bolts in 1st(leave the trany mount a little loose) and then lower it on down until the K frame bolts can be installed...
Index the LCA's to the torsion bars and slide them in...then install the torsion bar bolts...
Literally 10 minutes and its back on the jack stands to button everything up...