hole saw - Moparts Forums

Register Log In Moparts Forums Unlawfl's Race & Engine Tech hole saw

Print Thread

Re: hole saw [Re: Just-a-dart] #2529356 07/31/18 12:04 AM 07/31/18 12:04 AM
Joined: Jun 2003 Posts: 52,972 Romeo MI MR_P_BODY Master
MR_P_BODY Master Joined: Jun 2003 Posts: 52,972 Romeo MI	If I have to have a nice round hole I use a little smaller hole saw then use my adjustable boring bar in the mill.. turns out perfect

Entire Thread
Subject	Posted By	Posted
hole saw	bonefish	07/30/18 06:38 PM
Re: hole saw	cdwmotorsports	07/30/18 06:48 PM
Re: hole saw	markz528	07/30/18 09:28 PM
Re: hole saw	gzig5	07/31/18 12:06 AM
Re: hole saw	Just-a-dart	07/31/18 03:23 AM
Re: hole saw	MR_P_BODY	07/31/18 04:04 AM
Re: hole saw	John_Kunkel	07/31/18 10:36 PM
Re: hole saw	Sport440	07/31/18 04:35 AM
Re: hole saw	Stanton	07/31/18 03:00 PM
Re: hole saw	bonefish	07/31/18 03:16 PM
Re: hole saw	TRENDZ	07/31/18 04:20 PM

Moderated by Al_Alguire, Hotwheelsjr, moparts, not_a_charger, RangerDan440, tboomer

Hop To

Powered by UBB.threads™ PHP Forum Software 7.7.1