1967 Plymouth hubcap indentification

Print Thread

Re: 1967 Plymouth hubcap indentification [Re: gtx6970] #2527943 07/27/18 04:25 PM 07/27/18 04:25 PM
Joined: Jun 2003 Posts: 21,488 It's a dry heat gtx6970 OP Too Many Posts
gtx6970 OP Too Many Posts Joined: Jun 2003 Posts: 21,488 It's a dry heat	I was able to just barely read parts of the ink stamped part number on one of them. A little detective work I made it out to be 2823028 which is the flat non textured silver finish ones.

Entire Thread
Subject	Posted By	Posted
1967 Plymouth hubcap indentification	gtx6970	07/27/18 07:33 PM
Re: 1967 Plymouth wheel cover indentification	Alaskan_TA	07/27/18 07:35 PM
Re: 1967 Plymouth hubcap indentification	gtx6970	07/27/18 07:38 PM
Re: 1967 Plymouth hubcap indentification	Alaskan_TA	07/27/18 07:41 PM
Re: 1967 Plymouth hubcap indentification	6bblgt	07/27/18 08:24 PM
Re: 1967 Plymouth hubcap indentification	gtx6970	07/27/18 07:35 PM
Re: 1967 Plymouth hubcap indentification	Alaskan_TA	07/27/18 07:38 PM
Re: 1967 Plymouth hubcap indentification	gtx6970	07/27/18 08:25 PM
Re: 1967 Plymouth hubcap indentification	gtx6970	07/27/18 09:19 PM
Re: 1967 Plymouth hubcap indentification	Alaskan_TA	07/27/18 09:38 PM
Re: 1967 Plymouth hubcap indentification	gtx6970	07/27/18 09:50 PM
Re: 1967 Plymouth hubcap indentification	6bblgt	07/27/18 10:15 PM
Re: 1967 Plymouth hubcap indentification	Alaskan_TA	07/27/18 09:59 PM
Re: 1967 Plymouth hubcap indentification	gtx6970	07/31/18 08:33 PM

Hop To