Aluminum heads for a 440 - Moparts Forums

Register Log In Moparts Forums Moparts Question and Answer Aluminum heads for a 440

Print Thread

Re: Aluminum heads for a 440 [Re: IRON MAN] #2518025 07/05/18 04:20 PM 07/05/18 04:20 PM
Joined: Jun 2008 Posts: 3,916 usa L lewtot184 master
lewtot184 master L Joined: Jun 2008 Posts: 3,916 usa	an icon 836 (d-cup piston) with the 84cc head and .039' gasket is around 9.8:1. a 2.06" pin height flat top will be closer to 10.5:1 with a .039" gasket.

Entire Thread
Subject	Posted By	Posted
Aluminum heads for a 440	IRON MAN	07/04/18 02:31 PM
Re: Aluminum heads for a 440	fast68plymouth	07/04/18 03:11 PM
Re: Aluminum heads for a 440	justintyme	07/04/18 03:53 PM
Re: Aluminum heads for a 440	BlueRacer69	07/04/18 03:57 PM
Re: Aluminum heads for a 440	BSB67	07/04/18 04:01 PM
Re: Aluminum heads for a 440	lewtot184	07/04/18 04:20 PM
Re: Aluminum heads for a 440	IRON MAN	07/04/18 04:43 PM
Re: Aluminum heads for a 440	BSB67	07/04/18 04:55 PM
Re: Aluminum heads for a 440	therocks	07/04/18 05:34 PM
Re: Aluminum heads for a 440	GY3	07/04/18 08:46 PM
Re: Aluminum heads for a 440	topside	07/04/18 06:59 PM
Re: Aluminum heads for a 440	71birdJ68	07/04/18 08:29 PM
Re: Aluminum heads for a 440	fast68plymouth	07/05/18 12:19 AM
Re: Aluminum heads for a 440	MarkZ	07/05/18 04:18 AM
Re: Aluminum heads for a 440	IRON MAN	07/05/18 12:25 PM
Re: Aluminum heads for a 440	lewtot184	07/05/18 03:04 PM
Re: Aluminum heads for a 440	fast68plymouth	07/05/18 03:14 PM
Re: Aluminum heads for a 440	BSB67	07/05/18 08:05 PM
Re: Aluminum heads for a 440	lewtot184	07/05/18 08:20 PM
Re: Aluminum heads for a 440	BSB67	07/06/18 12:27 AM
Re: Aluminum heads for a 440	fast68plymouth	07/05/18 10:38 PM

Moderated by Al_Alguire, Hotwheelsjr, moparts, not_a_charger, RangerDan440, tboomer

Hop To

Powered by UBB.threads™ PHP Forum Software 7.7.1