Maximum CR open chamber iron heads no quench- pump gas

Print Thread

Re: Maximum CR open chamber iron heads no quench- pump gas [Re: domingo] #2497565 05/18/18 03:00 PM 05/18/18 03:00 PM
Joined: May 2008 Posts: 5,399 Aurora, Colorado 451Mopar master
451Mopar master Joined: May 2008 Posts: 5,399 Aurora, Colorado	Aluminum or steel heads? Cam is pretty decent size. I would try about 10:1 to start. You can add thicker head gaskets to drop compression from there if needed.

Entire Thread
Subject	Posted By	Posted
Maximum CR open chamber iron heads no quench- pump gas	domingo	05/17/18 07:30 PM
Re: Maximum CR open chamber iron heads no quench- pump gas	BradH	05/17/18 09:38 PM
Re: Maximum CR open chamber iron heads no quench- pump gas	domingo	05/17/18 09:45 PM
Re: Maximum CR open chamber iron heads no quench- pump gas	CSK	05/17/18 09:53 PM
Re: Maximum CR open chamber iron heads no quench- pump gas	polyspheric	05/17/18 10:08 PM
Re: Maximum CR open chamber iron heads no quench- pump gas	domingo	05/18/18 01:46 AM
Re: Maximum CR open chamber iron heads no quench- pump gas	Cab_Burge	05/18/18 03:15 AM
Re: Maximum CR open chamber iron heads no quench- pump gas	Anonymous	05/18/18 02:48 AM
Re: Maximum CR open chamber iron heads no quench- pump gas	topside	05/18/18 04:37 AM
Re: Maximum CR open chamber iron heads no quench- pump gas	rck850	05/18/18 06:12 AM
Re: Maximum CR open chamber iron heads no quench- pump gas	polyspheric	05/18/18 02:55 PM
Re: Maximum CR open chamber iron heads no quench- pump gas	topside	05/18/18 05:02 PM
Re: Maximum CR open chamber iron heads no quench- pump gas	451Mopar	05/18/18 07:00 PM
Re: Maximum CR open chamber iron heads no quench- pump gas	HotRodDave	05/18/18 08:38 PM
Re: Maximum CR open chamber iron heads no quench- pump gas	polyspheric	05/18/18 08:43 PM
Re: Maximum CR open chamber iron heads no quench- pump gas	domingo	05/19/18 12:34 AM
Re: Maximum CR open chamber iron heads no quench- pump gas	Clanton	05/19/18 01:09 AM
Re: Maximum CR open chamber iron heads no quench- pump gas	jwb123	05/19/18 12:40 AM
Re: Maximum CR open chamber iron heads no quench- pump gas	madscientist	05/19/18 12:42 AM
Re: Maximum CR open chamber iron heads no quench- pump gas	polyspheric	05/19/18 02:25 AM

Moderated by Al_Alguire, Hotwheelsjr, moparts, not_a_charger, RangerDan440, tboomer

Hop To