dana 60 - Moparts Forums

Register Log In Moparts Forums Unlawfl's Race & Engine Tech dana 60

Print Thread

Re: dana 60 [Re: rebel] #2495443 05/13/18 10:52 AM 05/13/18 10:52 AM
Joined: Apr 2003 Posts: 3,527 Tulsa, Oklahoma 340Cuda master
340Cuda master Joined: Apr 2003 Posts: 3,527 Tulsa, Oklahoma	Originally Posted By rebel What about 4.88s? I have an Ultimate Dana 60 that currently has 4.10 gears & I have a contact who will swap his 4.88s for my 4.10s. Are they going to fit? To the best of my knowledge no... There are spacers available but not recommended for manual shift or high horsepower applications. However the 4.10 is not going to work in your friends car either unless you swapped carriers as well as gears.

Entire Thread
Subject	Posted By	Posted
dana 60	br67	05/12/18 10:23 PM
Re: dana 60	Cab_Burge	05/13/18 01:11 AM
Re: dana 60	rebel	05/13/18 12:37 PM
Re: dana 60	340Cuda	05/13/18 02:52 PM
Re: dana 60	Cab_Burge	05/13/18 06:48 PM
Re: dana 60	rowin4	05/13/18 07:46 PM

Moderated by Al_Alguire, Hotwheelsjr, moparts, not_a_charger, RangerDan440, tboomer

Hop To

Powered by UBB.threads™ PHP Forum Software 7.7.1