Let's Talk Headers and Exhaust

Print Thread

Re: Let's Talk Headers and Exhaust [Re: Mr onetwo] #2488620 04/27/18 11:10 AM 04/27/18 11:10 AM
Joined: May 2003 Posts: 15,487 Florida S scratchnfotraction I Live Here
scratchnfotraction I Live Here S Joined: May 2003 Posts: 15,487 Florida	I did not slot any holes but I did ream them a little bigger to easy fitting them on the studs. I used lock washers/nuts on all my studs with no issues. once I found the gasket issue and it needing flip 180* to be flush around the ports and sit on the machined edge and not hang over it.

Entire Thread
Subject	Posted By	Posted
Let's Talk Headers and Exhaust	Mr onetwo	04/27/18 01:30 PM
Re: Let's Talk Headers and Exhaust	scratchnfotraction	04/27/18 02:49 PM
Re: Let's Talk Headers and Exhaust	Mr onetwo	04/27/18 02:58 PM
Re: Let's Talk Headers and Exhaust	scratchnfotraction	04/27/18 03:06 PM
Re: Let's Talk Headers and Exhaust	scratchnfotraction	04/27/18 03:10 PM
Re: Let's Talk Headers and Exhaust	scratchnfotraction	04/27/18 03:33 PM
Re: Let's Talk Headers and Exhaust	Mr onetwo	04/27/18 11:09 PM
Re: Let's Talk Headers and Exhaust	scratchnfotraction	04/28/18 05:24 AM
Re: Let's Talk Headers and Exhaust	SomeCarGuy	04/27/18 09:21 PM
Re: Let's Talk Headers and Exhaust	Mr onetwo	04/27/18 11:08 PM
Re: Let's Talk Headers and Exhaust	larrymopar360	04/28/18 04:29 AM
Re: Let's Talk Headers and Exhaust	Mr onetwo	04/28/18 04:31 AM
Re: Let's Talk Headers and Exhaust	larrymopar360	04/28/18 05:05 AM
Re: Let's Talk Headers and Exhaust	SomeCarGuy	04/28/18 04:30 AM
Re: Let's Talk Headers and Exhaust	SomeCarGuy	04/28/18 06:11 AM
Re: Let's Talk Headers and Exhaust	Mr onetwo	04/29/18 04:51 PM
Re: Let's Talk Headers and Exhaust	sensi	05/15/18 04:36 AM

Hop To