440 for Barney Dyno Results

Print Thread

440 for Barney Dyno Results #2487086 04/24/18 01:40 AM 04/24/18 01:40 AM
Joined: Oct 2011 Posts: 326 Alberta Wookie316 OP enthusiast
Wookie316 OP enthusiast Joined: Oct 2011 Posts: 326 Alberta	Since my 511 took a turn for the worse, I decided to swap the roller into my 440 so I can run my car at the start of our season. The jury is still out on what ultimately happens with the 511, but for now the 440 should be a great fit for Barney. It made 685 peak HP @ 6700. It pulls very nice into the 7’s which tells me the valve train is staying happy. Peak torque is in the 580’s @ 5500. For what I have into the motor I am happy with the numbers. Of course I wanted to hit the 700 make, but I knew that was a stretch with what is in the motor. Cam is a custom grind 268/276 with .451/.445 lobe lift. Indy EZ-1 heads and a 4500 on top. Running a vac pump too. Enjoy the attached video. 440 Dyno 1971 Plum Crazy Super Bee. 572 World Aluminum block with a Cope 727 & Dana 4.10 out back. 9.88 @ 138 with a 1.35 60 NA. Dialed back to 10.0’s. 4000 lbs with me in it.

Hop To