cometics and torquing the heads SBM

Print Thread

Re: cometics and torquing the heads SBM [Re: Moparnut426] #2484526 04/18/18 10:41 AM 04/18/18 10:41 AM
Joined: Oct 2011 Posts: 3,036 bean town ....Ca W WHITEDART master
WHITEDART master W Joined: Oct 2011 Posts: 3,036 bean town ....Ca	Originally Posted By Moparnut426 Is there any special torque spec for the SBM using ARP bolts with aluminum heads? I torqued them down to 110lb ft with the old felpro gaskets, but after I went through the engine this winter I cant seem to find the spec. I haven't seen anything on Cometics web site either. check should be whatever the Machine Shop used on the torque plate typically the gasket manufacturer will not recommend a torque spec that would be The Machinist In the 8s N/A.with Brett miller W8's 5.07 at 133 at 2700lb

Entire Thread
Subject	Posted By	Posted
cometics and torquing the heads SBM	Moparnut426	04/17/18 02:37 AM
Re: cometics and torquing the heads SBM	Stroker Scamp	04/18/18 03:40 AM
Re: cometics and torquing the heads SBM	FastmOp	04/18/18 05:56 AM
Re: cometics and torquing the heads SBM	GY3	04/18/18 06:22 AM
Re: cometics and torquing the heads SBM	rowin4	04/18/18 06:27 AM
Re: cometics and torquing the heads SBM	WHITEDART	04/18/18 02:41 PM
Re: cometics and torquing the heads SBM	Moparnut426	04/18/18 06:44 PM

Hop To