Lifters are comp cams endure x. Oil pressure is at 45 at idle. Instantly jumps to 75 with a little throttle. I know this is still ok just not used to it being below 65 at idle. Am I just paranoid? I have run the same block for almost 20 years and this is the first time I have ever had oil pressure this low.
Me thinks your worried over nothing
![grin grin](/ubbthreads/images/graemlins/custom/grin.gif)
AKA your golden
![up up](/ubbthreads/images/graemlins/custom/thumbs_up.gif)
My old pump gas 400 stroker motor had 20 lbs at 850 RPM idle with 5W20 Wt. oil at 170+ F oil temps here in the summer, it had 30 Lbs. at 1200 and 65 lbs. above 3000 RPM
I use the ten Lbs. for each 1000 RPM rule on determining if I have enough oil pressure
![scope scope](/ubbthreads/images/graemlins/custom/scope.gif)