Fitting for in line trans oil temp

Print Thread

Re: Fitting for in line trans oil temp [Re: Clanton] #2475294 04/01/18 12:43 PM 04/01/18 12:43 PM
Joined: May 2011 Posts: 4,489 northern,Ohio,USA C Clanton OP master
Clanton OP master C Joined: May 2011 Posts: 4,489 northern,Ohio,USA	Looks like the barb/pushloc fitting is a 3/8" npt and the adaptor is also to go into a tee for them all.[or a 1/4"npt?] Last edited by Clanton; 04/01/18 12:44 PM. GOTBOOST!New improved with Victor heads. http://www.enginelabs.com/mopar-big-bloc...t-of-necessity/

Entire Thread
Subject	Posted By	Posted
Fitting for in line trans oil temp	Clanton	04/01/18 04:03 PM
Re: Fitting for in line trans oil temp	Clanton	04/01/18 04:10 PM
Re: Fitting for in line trans oil temp	Clanton	04/01/18 04:43 PM
Re: Fitting for in line trans oil temp	MR_P_BODY	04/01/18 05:49 PM
Re: Fitting for in line trans oil temp	Clanton	04/01/18 07:04 PM
Re: Fitting for in line trans oil temp	Clanton	04/01/18 08:43 PM
Re: Fitting for in line trans oil temp	Clanton	04/01/18 09:00 PM
Re: Fitting for in line trans oil temp	Clanton	04/01/18 09:06 PM
Re: Fitting for in line trans oil temp	340Cuda	04/02/18 12:01 AM
Re: Fitting for in line trans oil temp	Clanton	04/02/18 12:34 AM
Re: Fitting for in line trans oil temp	340Cuda	04/02/18 12:37 AM
Re: Fitting for in line trans oil temp	A39Coronet	04/02/18 12:15 AM
Re: Fitting for in line trans oil temp	340Cuda	04/02/18 12:26 AM
Re: Fitting for in line trans oil temp	Clanton	04/02/18 12:32 AM
Re: Fitting for in line trans oil temp	Clanton	04/06/18 10:03 PM

Hop To