Just installed a set on an original panel. Had to return the first set for the right side bezel being bent and twisted, which did not allow the taillight lens to sit properly. I was worried it would break the lens and or crack the new bezel when installed. Second set had a noticeably better right side bezel. On the bench laying flat all looked good. All assembled on car the left lower bezel would not sit even with lower center bezel. I will have to spend some time tweaking the left lower bezel to lower center bezel for better fitment. Otherwise it looks very nice and does the job much better than my originals for looks, but the fit could be a bit better between the bezels. Studs matched up perfectly with holes in original tail panel.