I purchased a freshened up SS/AH short block that was set up to shift at 9500rpm. So the bottom end will live. We are not going to turn it that high so we can save the valve train LOL. I couldn't find any info for rpm ranges for most of the intakes I have looked at online. Even considered some of the old rat roasters, but there is even less info on those!

I wish I could run a tunnel ram, but they are prohibited. That leaves only a few choices. For the carbs, I plan on using the carbs from my wedge. They are heavily worked over Eddie 800's. Right now they are working well on my 496" wedge shifting at 7600 rpm.

-Dave