Pressure check a Hemi or whatever block

Print Thread

Re: Pressure check a Hemi or whatever block [Re: hemi-itis] #2455216 02/21/18 06:54 PM 02/21/18 06:54 PM
Joined: Jan 2004 Posts: 8,373 fredericksburg,va C cudaman1969 OP master
cudaman1969 OP master C Joined: Jan 2004 Posts: 8,373 fredericksburg,va	Originally Posted By hemi-itis Engine in car or bare block on the stand? On a stand, bare block. I was going to make a head plate of 1/4 aluminum but the kit said without a head it needed a torque plate.? I figured 40 psi would show any cracks, no mater how hot it is. But that's why I'm asking.

Entire Thread
Subject	Posted By	Posted
Pressure check a Hemi or whatever block	cudaman1969	02/21/18 05:17 AM
Re: Pressure check a Hemi or whatever block	Cab_Burge	02/21/18 05:21 AM
Re: Pressure check a Hemi or whatever block	cudaman1969	02/21/18 05:45 AM
Re: Pressure check a Hemi or whatever block	Cab_Burge	02/21/18 09:35 AM
Re: Pressure check a Hemi or whatever block	Stanton	02/21/18 06:11 AM
Re: Pressure check a Hemi or whatever block	AndyF	02/21/18 06:23 AM
Re: Pressure check a Hemi or whatever block	Cab_Burge	02/21/18 09:30 AM
Re: Pressure check a Hemi or whatever block	hemi-itis	02/21/18 06:33 AM
Re: Pressure check a Hemi or whatever block	Cab_Burge	02/21/18 09:32 AM
Re: Pressure check a Hemi or whatever block	cudaman1969	02/21/18 10:54 PM
Re: Pressure check a Hemi or whatever block	Digger73	02/21/18 05:09 PM
Re: Pressure check a Hemi or whatever block	rickraw	02/22/18 12:33 AM
Re: Pressure check a Hemi or whatever block	Clanton	02/21/18 05:29 PM
Re: Pressure check a Hemi or whatever block	an8sec70cuda	02/21/18 05:35 PM
Re: Pressure check a Hemi or whatever block	Clanton	02/21/18 05:42 PM
Re: Pressure check a Hemi or whatever block	Cab_Burge	02/21/18 09:26 PM
Re: Pressure check a Hemi or whatever block	dvw	02/21/18 06:14 PM
Re: Pressure check a Hemi or whatever block	Stanton	02/21/18 09:24 PM
Re: Pressure check a Hemi or whatever block	an8sec70cuda	02/21/18 11:02 PM

Hop To