Dana 60 in a Dart - Moparts Forums

Register Log In Moparts Forums Unlawfl's Race & Engine Tech Dana 60 in a Dart

Print Thread

Re: Dana 60 in a Dart [Re: DusTed74] #2453705 02/18/18 11:53 PM 02/18/18 11:53 PM
Joined: Jan 2003 Posts: 31,082 Oregon A AndyF I Win
AndyF I Win A Joined: Jan 2003 Posts: 31,082 Oregon	Engine offset is 1.250 on most A body cars but it might vary by the year. If you really want to see what is going on just slide a piece of roll bar tubing thru a bare block and transmission. The roll bar tubing should point right at the pinion yoke. Last edited by AndyF; 02/19/18 01:36 AM.

Entire Thread
Subject	Posted By	Posted
Dana 60 in a Dart	DusTed74	02/18/18 08:27 PM
Re: Dana 60 in a Dart	Cab_Burge	02/18/18 08:36 PM
Re: Dana 60 in a Dart	CMcAllister	02/18/18 09:37 PM
Re: Dana 60 in a Dart	dartman366	02/19/18 03:41 AM
Re: Dana 60 in a Dart	AndyF	02/19/18 03:53 AM
Re: Dana 60 in a Dart	Cab_Burge	02/19/18 04:05 AM
Re: Dana 60 in a Dart	crackedback	02/19/18 05:08 AM
Re: Dana 60 in a Dart	AndyF	02/19/18 05:35 AM
Re: Dana 60 in a Dart	crackedback	02/19/18 05:59 AM
Re: Dana 60 in a Dart	AndyF	02/19/18 07:28 AM
Re: Dana 60 in a Dart	JAMESDART	02/19/18 04:58 PM
Re: Dana 60 in a Dart	AndyF	02/19/18 05:57 PM
Re: Dana 60 in a Dart	CMcAllister	02/19/18 07:37 PM
Re: Dana 60 in a Dart	DusTed74	02/21/18 02:31 AM

Moderated by Al_Alguire, Hotwheelsjr, moparts, not_a_charger, RangerDan440, tboomer

Hop To

Powered by UBB.threads™ PHP Forum Software 7.7.1