Separating lower control arm from ball joint stud

Print Thread

Re: Separating lower control arm from ball joint stud [Re: cruzin] #2447139 02/05/18 11:02 PM 02/05/18 11:02 PM
Joined: Jan 2007 Posts: 7,664 IN A ahy master
ahy master A Joined: Jan 2007 Posts: 7,664 IN	I like and use the Mancini front end tool for this joint. I got the kit. And yes... when everything is in place and tensioned up a carefully placed hammer blow helps break it loose. Just leave the nut on loose to catch it when it goes.

Entire Thread
Subject	Posted By	Posted
Separating lower control arm from ball joint stud	11secaarcuda	02/03/18 03:47 PM
Re: Separating lower control arm from ball joint stud	fourgearsavoy	02/03/18 03:59 PM
Re: Separating lower control arm from ball joint stud	GoodysGotaCuda	02/03/18 04:39 PM
Re: Separating lower control arm from ball joint stud	CKessel	02/03/18 06:35 PM
Re: Separating lower control arm from ball joint stud	doctor_mopar	02/03/18 06:58 PM
Re: Separating lower control arm from ball joint stud	therocks	02/03/18 07:57 PM
Re: Separating lower control arm from ball joint stud	Ply72rr	02/03/18 10:34 PM
Re: Separating lower control arm from ball joint stud	John_Kunkel	02/03/18 11:26 PM
Re: Separating lower control arm from ball joint stud	Supercuda	02/04/18 12:31 AM
Re: Separating lower control arm from ball joint stud	FJR doc	02/04/18 02:05 AM
Re: Separating lower control arm from ball joint stud	therocks	02/04/18 03:58 AM
Re: Separating lower control arm from ball joint stud	DoctorDiff	02/04/18 04:38 AM
Re: Separating lower control arm from ball joint stud	moparx	02/04/18 04:30 PM
Re: Separating lower control arm from ball joint stud	Supercuda	02/04/18 05:44 PM
Re: Separating lower control arm from ball joint stud	poorboy	02/05/18 08:02 AM
Re: Separating lower control arm from ball joint stud	cruzin	02/05/18 09:03 PM
Re: Separating lower control arm from ball joint stud	ahy	02/06/18 03:02 AM
Re: Separating lower control arm from ball joint stud	rumblebee4232	02/06/18 04:41 AM
Re: Separating lower control arm from ball joint stud	11secaarcuda	02/06/18 01:02 PM

Moderated by Al_Alguire, Hotwheelsjr, moparts, not_a_charger, RangerDan440, tboomer

Hop To