|
Re: Compression/horsepower
[Re: cmcgee123]
#243261
03/05/09 01:44 AM
03/05/09 01:44 AM
|
Joined: Dec 2003
Posts: 5,314 Carstairs, Alberta, Canada
dave571
master
|
master
Joined: Dec 2003
Posts: 5,314
Carstairs, Alberta, Canada
|
Quote:
its gonna depend a lot more on head flow and cam choice than compression alone.
The heads and the cam are the heart of the motor.
I've seen tests in mags where they took a motor, dyno'd it, then started adding gaskets to reduce compression. The loss of compression had a surprisingly small effect on the peak hp.
Most builders say 1 point of comp alone will only ad 3% to a given combo.
The combo needs to be matched. Obviously you wouldn't run the same cam in a 10:1 iron motor, as a 14:1 alum motor. Add in that it is pretty unlikely that you'd ever get a iron head to flow like an aluminum one. Not because of the material, just because the alum head will be designed as a performance head.
|
|
|
|
|
|