12.17 best first time out earlier this year.
Since then, mildly ported the heads, changed cam and springs and fresh valve job. Swapped from single plane Mopar intake to air gap. Milled heads to raise compression up to around 10.4 to 1
Thats the major stuff. Not much really when you add it all up. The rest is just tinkering with timing, jetting, getting front end alignment from way off to pretty close. And finally swapping to radials.
Last edited by B3422W5; 10/17/17 07:52 PM.
69 Dart GTS A4 Silver All steel, flat factory hood, 3360race weight
418 BPE factory replacement headed stroker, 565 lift solid cam
Best so far, low 10.30’s 1/4
1.41 best 60 foot
6.56 at 104.17
| 
